APPLE Laptop AC Adapter

APPLE Laptop AC Adapter Articles & Tips:

Then what should be paid attention to before purchasing a APPLE AC adapter?
1. Make sure the input voltage range of the APPLE laptop AC Adapter. Usually, the range of APPLE laptops is approximately 100V to 250V, which can be used normally in a foreign country, like USA.
2. The real capacity of the adapter. As enough current margin reserved in a high capacity adapter, it can replace the adapters of small nominal current. Then it won't happen to overheat or low output voltage conditions. However, try and feel the temperature of your laptop when running with the adapter. If it is overheat, it must be poor in performance or have not enough capacity as they claimed.
3. Make sure the output voltage and current of the APPLE AC adapter. Although a high current output will benefit you a lot, the value of output voltage should be controlled. With different load resistance and different overvoltage / overcurrent protection point, an unsuitable one will get your laptop at risk of no protection.

By the way, when purchasing a APPLE AC adapter, make sure the terminal size of DC power adapter output line. The power interface comes to be different with all laptop brands. Or the adapter will be useless.

How to Fix a APPLE AC Adapter ?

The ability to conduct business, surf the Internet and use computer programs from a device no larger than a briefcase is what makes laptop computers, like APPLE models, so popular. But without a power source, these laptops would be pretty useless. So if your laptop AC adapter isn't working, it's probably because of a short in the cord. There are ways to fix your APPLE laptop power cord without the help of a service technician.

• Insert the tip of a flat-head screwdriver in the seam in the middle of the adapter box. This is the black rectangular box located halfway between the plug and AC adapter on the power cord.
• Work your way around the adapter box with the flat-head screwdriver until the two halves become loose. Twist up at each corner with the screwdriver to pop the top half away from the bottom.
• Pull any coiled cord inside the adapter box out by pulling on the end of the cord.
• Cut down the length of the cable from the adapter box with your wire cutters. Be careful to cut just underneath the plastic cord without cutting the metal wire underneath. Be careful because this process is delicate.
• Locate the damage or short in the wire. It will be visible as frayed or broken pieces of wire somewhere along the length of the cable.
• Cut the cable at the short and strip down the ends of either cut side about an inch. Twist the ends of the metal wires together, making sure each side is completely connected to the other.
• Wrap electrical tape around the exposed metal wires and run more tape along the length of the cord over the slit. Replace the top half of the adapter box with the bottom and your APPLE power cord should be fixed.

Disclaimer:

The products supplied by Global-ecommerce-Batteries.com are [replacement for] sold for use with certain products of computer manufacturers, and any reference to products or trademarks of such companies is purely for the purpose of identifying the computers with which our products [are replacement for] may be used. Our Company and this Web site are neither affiliated with, authorized by, licensed by, distributors for, nor related in any way to these computer manufacturers, nor are the products offered for sale through our web site manufactured by or sold with the authorization of the manufacturers of the computers with which our products [are replacement for] may be used.